Have you ever wondered why heaters are called heaters and not coolers? Probably because they’re always warm. If you’ve got a heater that needs an upgrade but aren’t sure what type of heater is best for your home, this blog will guide you through the heating system selection process. We’ll discuss the types of heaters available and how to install heating systems like radiators, heat pumps, and electric heaters. But before getting into the technicalities of heating systems, we’ll give you some tips on selecting the right heater size for your room.
Get Ready to Install a Heater: What You Need to Know
To begin, let’s familiarize ourselves with the different types of heaters available. Hot water tubing systems, electric radiant floor heating, tankless water heaters, and storage tank water heaters are some of the popular options.
When choosing a heater, consider fuel sources such as natural gas, liquid propane, electricity, and solar hot water systems. Each type of heater has its own pros and cons. Additionally, you must factor in the cost of the installation and ensure that it is within your budget. Once you have decided on a heater type and fuel source, you can plan for maintenance by signing up for annual service to clean filters, check burners, and flush heat exchangers. By following these steps, you can choose a heater that offers optimal heating performance and affordability for your home.
Finding the Right Size Heater for Your Room
– Determine the size of the room before selecting a heater.
– Consider the temperature difference you want to achieve in the room.
– If you want to heat a room to a particular temperature, consider purchasing an electric heater with a thermostat. This type of heater will allow you to set the desired temperature and let it automatically adjust based on the outside temperature.
– Alternatively, you can also opt for a gas heater with similar features. The natural gas heater will provide consistent heat without having to fiddle with the controls too often.
– In case you prefer radiant heat, look for floor heating systems that feature ceramic heating elements and water-based insulation. These systems provide a warm and comfortable environment without requiring manual operation or maintenance.
– Lastly, if your space is small, consider installing portable heaters instead of electric ones. They are easy to use and can be used effectively in any part of the house without causing any harm or inconvenience to anyone.
Types of Heaters Available
-Twin-sink electric heater: This heater is made up of two heating elements. One on the bottom of the water tank and the other on the top of the water tank. They are known for their efficiency and durability.
– Electric fan heater: These heaters are similar to traditional hot water heaters, but they use less water and less electricity. They also produce more warm air than hot water heaters.
– Electric infrared heater: These types of heaters use a thermostat to control the hotness of a room. They are energy-efficient and can be used in climates where it’s too cold or too warm for traditional heaters.
– Ceramic heater: Made of ceramic heating element encased in a heavy-duty metal housing, these heaters have high-efficiency ratings and longer lifespans compared to other types of heating systems.
– Electric floor heater: Most of the nowadays models come with safety features like thermostat control, automatic shut-off feature, space heaters, etc. It can be used in homes without ACs as it provides continuous warm air without any fluctuations.
Advantages and Disadvantages of Different Heaters
– Heaters are commonly used for heating and cooling.
– If you’re looking for a heating solution that is energy efficient, heat pumps can be a good option. They can efficiently heat homes using less electricity than other types of heating systems.
– A heat pump is a type of climate-control system that uses a refrigeration cycle to heat or cool air. It works best in moderate climates where temperatures rarely dip below freezing.
– The drawback of heaters is that they are expensive to operate and maintain. Also, they consume a lot of energy. In contrast, electric resistance systems are popular as supplemental heat in less-used rooms. They are inexpensive and require less maintenance than heaters.
DIY Tips for Installing a Heater at Home
When it comes to heating your home, there are different heating systems to choose from. Depending on the fuel source available in your area (natural gas, liquid propane, electricity, solar hot water), you can select the heating system that best suits your needs and budget.
Here are some factors to consider when choosing a heating system:
– Size: Choose a heater of the same size as the space you’re heating. This will ensure consistency and efficiency in the system.
– Type: Choose a heat pump or gas furnace based on your preferences and energy needs. Both types offer efficient heating with minimal emissions, but heat pumps cost more to operate and must be replaced less often than gas furnaces.
– Efficiency: Select an energy-efficient heater that not only provides consistent heat but also uses less fuel. The more efficient a heater is, the less energy it will use overall. This makes them environmentally responsible investments.
– Features: Look for features like thermostats and controls that allow you to customize the temperature of your home and ensure safe use of the heating system
– Consider tankless water heaters if you want to reduce your energy costs while still having hot water on demand when needed. These water heaters use less water than traditional hot water systems and are more energy efficient than tank models. However, they require special plumbing and should be installed by a professional.
Conclusion
We hope that reading this blog has helped you understand the basics of heater installation and picking the right heater for your home. If you’re still struggling with any of these, get in touch with us and we’ll be glad to assist you further. Happy heater installation!